Re: used nasload and still nothing

Author: bow2evil
Forum: General
Date: 2008-07-03

heres a new one no idea why or how i got this one
GPIO 0 has toggled, continuing.


CFE version 1.2.11 for BCM94780 (32bit,SP,LE)
Build Date: Mon Jan 17 22:33:44 PST 2005 (builder@nlab-sv1-builder)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena.
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
CPU type 0x29006: 264MHz
Total memory: 0x2000000 bytes (32MB)

Total memory used by CFE: 0x80300000 - 0x80442910 (1321232)
Initialized Data: 0x8033CD30 - 0x8033F560 (10288)
BSS Area: 0x8033F560 - 0x80340910 (5040)
Local Heap: 0x80340910 - 0x80440910 (1048576)
Stack Area: 0x80440910 - 0x80442910 (8192)
Text (code) segment: 0x80300000 - 0x8033CD30 (249136)
Boot area (physical): 0x00443000 - 0x00483000
Relocation Factor: I:00000000 - D:00000000

Device eth0: hwaddr 00-10-75-00-B2-22, ipaddr 192.168.1.102, mask 255.255.255.0

gateway not set, nameserver not set
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 2658304 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kb, linesize 16 bytes (2 ways)
Primary data cache 16kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (root@localhost.localdomain) (gcc version 3.0 20010422 (pre
release) with bcm4710a0 modifications) #2 Thu Mar 24 18:59:47 PST 2005
BCM47XX ChipID = 0x4704, RevisionID = 8, Options = 0x2
Setting GPIO 6 to output of 1.
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4704 rev 8 at 264 MHz
Calibrating delay loop... 263.78 BogoMIPS
Memory: 29532k/32768k available (2358k kernel code, 3236k reserved, 132k data, 8
4k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction... unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver v1.1.22 [Flags: R/O]
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-algo-bit.o: i2c bit algorithm module
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 0) is a 16550A
Generic MIPS RTC Driver v1.0
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AEC6265R: IDE controller on PCI bus 01 dev 10
PCI: Enabling device 01:02.0 (0000 -> 0001)
AEC6265R: chipset revision 7
AEC6265R: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AEC6265R: ROM disabled at 0x00000000
Enabling AEC GPO for HD power.
ide2: BM-DMA at 0x0120-0x0127, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x0128-0x012f, BIOS settings: hdg:pio, hdh:pio
hde: WDC WD400BB-22HEA1, ATA DISK drive
ide2 at 0x100-0x107,0x10a on irq 2
blk: queue 802b9488, I/O limit 4095Mb (mask 0xffffffff)
hde: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, (U)DMA
Partition check:
/dev/ide/host2/bus0/target0/lun0: p1 p2<6>PPP generic driver version 2.4.2
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Amd/Fujitsu Extended Query Table v1.0 at 0x0040
number of CFI chips: 1
Flash device: 0x200000 at 0x1c000000
Physically mapped flash: cramfs filesystem found at block 1380
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x001e0000 : "linux"
0x0015935c-0x001e0000 : "rootfs"
0x001e0000-0x001f0000 : "nvramcopy"
0x001f0000-0x00200000 : "nvram"
sflash: found no supported devices
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Enabling device 01:03.2 (0000 -> 0002)
ehci_hcd 01:03.2: PCI device 1106:3104
ehci_hcd 01:03.2: irq 2, pci mem c000f000
usb.c: new USB bus registered, assigned bus number 1
ECHI PCI device 31041106 found.
ECHI reg 0x49 = 80233220
ECHI reg 0x49 changed to = 80233200
ECHI reg 0x4b = 80233209
ECHI reg 0x4b changed to = 80233229
PCI: 01:03.2 PCI cache line size set incorrectly (0 bytes) by BIOS/FW, correctin
g to 32
ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 4 ports detected
host/usb-uhci.c: $Revision: 1.275 $ time 18:59:55 Mar 24 2005
host/usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 01:03.0 (0000 -> 0001)
ECHI PCI device 30381106 found.
UCHI reg 0x41 = 10
UCHI reg 0x41 changed to = 0
host/usb-uhci.c: USB UHCI at I/O 0x140, IRQ 2
host/usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
ECHI PCI device 30381106 found.
UCHI reg 0x41 = 10
UCHI reg 0x41 changed to = 0
host/usb-uhci.c: USB UHCI at I/O 0x160, IRQ 2
host/usb-uhci.c: Detected 2 ports
hub.c: port 3 over-current change
usb.c: new USB bus registered, assigned bus number 3
hub.c: port 4 over-current change
hub.c: USB hub found
hub.c: 2 ports detected
host/usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
host/usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
host/usb-ohci.c: usb-00:03.0, PCI device 14e4:4715
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usblp
printer.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Skipping autodetection of RAID arrays.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k freed
Algorithmics/MIPS FPU Emulator v1.5

pivot_rc starting...
pivot_rc pcramfs: wrong magic
roceeding to boot from disk...
ERROR(a):mount_pivot_point failed to mount location : /dev/ide/host2/bus0/target
0/lun0/part1...
ERROR(b):mount_pivot_point error : Invalid argument...
pivot_rc boot loop error for location 0...
pivot_rc complete -> calling /sbin/init...

Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmserbus.o
Using /lib/modules/2.4.20/kernel/drivers/i2c/bcm2wire.o
Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmrtcst4181.o
Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmlm63.o
Using /lib/modules/2.4.20/kernel/drivers/net/et/et.o
Using /lib/modules/2.4.20/kernel/drivers/scsi/frodo/frodo.o
insmod: init_module: frodo: Device or resource busy
Using /lib/modules/2.4.20/kernel/arch/mips/brcm-boards/bcm947xx/bcmgpio.o
Using /lib/modules/2.4.20/security/sec.o
Using /lib/modules/2.4.20/kernel/drivers/se/bcm_se.o
Checking to see that USB initialization is done...
Turning on swapping...
handling MD device /dev/md/0
analyzing super-block
disk 1: /dev/null, failed
disk 2: /dev/null, failed
disk 3: /dev/null, failed
disk 4: /dev/null, failed
disk 5: /dev/null, failed
disk 6: /dev/null, failed
disk 7: /dev/null, failed
Setting up swapspace version 1, size = 511995904 bytes
New Disk Handling: Creating new pool `mss-hdd' of size 77132576 blocks on newly
discovered disk `SYSTEM'.
handling MD device /dev/md/1
analyzing super-block
handling MD device /dev/md/2
analyzing super-block
disk 0: /dev/md/1, 38566288kB, raid superblock at 38566208kB
mkreiserfs 3.6.11 (2003 www.namesys.com)

A pair of credits:
Oleg Drokin was the debugger for V3 during most of the time that V4 was under
development, and was quite skilled and fast at it. He wrote the large write
optimization of V3.

Alexander Lyamin keeps our hardware running, and was very generous to our
project in many little ways.

reiserfs_create: can not create that small (0 blocks) filesystem
Mounting /dev/se/2 on /shares/mss-hdd.
mount: Mounting /dev/se/2 on /shares/mss-hdd failed: Invalid argument
New Disk Handling: Creating new share `Public' in new pool `mss-hdd' on newly di
scovered disk `SYSTEM'.
New Disk Handling: Finished creating new share `Public' in new pool `mss-hdd' on
newly discovered disk `SYSTEM'.
ERROR: PDC pool `mss-hdd' is not mounted.
ERROR: PDC pool `mss-hdd' is not mounted.
ERROR: PDC pool `mss-hdd' is not mounted.
ERROR: PDC pool `mss-hdd' is not mounted.
Hit enter to short-circuit regular system start-up...No SATA controller found.
smartctl: applet not found
Notifying user: Error: Disk `SYSTEM' is Broken.
eth0: No such process
eth1: No such device
eth0: Network is unreachable
Oops in fault.c::do_page_fault, line 192:
$0 : 00000000 1000fc00 00000001 00000001 80274ca0 00000001 00000001 0000291e
$8 : 0000291e 803e9b20 00000000 00000000 80290f41 fffffff8 0000000a 803e9adb
$16: 80277464 00000001 ffa4db8c 8197d000 81046198 005b2474 810c7c00 00000000
$24: ffffffff 00000002 803e8000 803e9c38 00000000 80062e7c
Hi : ffffb389
Lo : 0000197d
epc : 80062f18 Not tainted
Status: 1000fc03
Cause : 00000008
Process init (pid: 79, stackpage=803e8000)
Stack: fffffff4 8107e5ec 81046198 00000000 81046198 8107e5ec 81046198
802eca6c 00000000 00000000 80062ce8 1005d94d 7fff7ac8 80028cec 8029d16c
81a61be0 000002dc 802d2d20 802d2d20 803e9cd8 802ec9c0 810be010 803e9d80
7fff7cb8 00000009 00000097 80047234 802d2d20 fffffff4 81e0de60 81a61c50
803e9d00 802d2d20 803e9d80 80047388 00000097 802d2d20 802d2d20 802ec9c0
80050fa8 ...
Call Trace: [<80062ce8>] [<80028cec>] [<80047234>] [<80047388>] [<80050fa8>]
[<8004363c>] [<80043e64>] [<8004406c>] [<80044054>] [<80040ab4>] [<800305d0>]
[<80041644>] [<8002771c>] [<80030228>] [<80022768>] [<800226f8>] [<800160a4>]
[<80002054>] [<80022a58>] [<80209474>] [<8000a694>] [<802093ec>] [<800152a0>]
[<80042ba0>] [<80007d04>] [<80008308>] [<8000c078>]

Code: 2604fffc 08018baa 24061000 <8fc20008> 8c46003c 10c00007 00000000 3c04
8021 24843824

• 0
• Vote